In some cases, product photos on the website may differ slightly from the originals.
Besides the version with standard cable, the lamp is also available with Schlemmer, TYCO, WAŚ 7-pin or WAŚ 5-pin connectors
Lamp is easily fitted to the vehicle via two M8x30 screws with a 150mm spacing.
Position light
In lamps from W250 series the position light consists of 4 luminous areas, located on the edges of the lamp and additionally in the form of a logo in the middle of the lamp, hidden underneath the reflective device.
Indicator light
A feature of this lamp is that the indicator light is located in the same upper module as the position light. When the indicator is activated, the red position light is turned off.
Reversing light
The reversing light takes up 2 or 3 stripes depending on the version. In the 5-light version it is symmetrically positioned on the right and left side of the reflective device.
In the 4-light version it is placed on 3 modules on the right or on the left side of the reflective device, depending on the chosen side version.
Fog light
In lamps from W250 series, the fog light is always 2 light modules located to the right or left of the reflective device, depending on the lamp version.
Stop light
In W250 series stop light appears in the two lower stripes on the left or right side of the lamps, depending on the left or right version chosen. It is default setup for 4, 5 functions lamp and for 3 functions lamp in variant 2.
3 Functions Lamp
Option to order with variant 1 or variant 2
Variant 1: Stop light in all 6 stripes (either side of the triangle reflective device) – shown on right picture
Variant 2: Stop Light in the two lower stripes on the left or right side of the lamps, depending on the left or right version chosen – shown on above picture
W250DD - dynamic indicator All lamps from the W247 series, in all variants, are available in both static and dynamic indicator versions. The part numbers of the dynamic indicator lamps are always marked with the letters DD.
The product is also available with a TYCO connector. If necessary, please add a note when placing an order.
This product is also available with a Schlemmer connector. All products with Schlemmer connectors have ‘SZ' in their catalogue number. When placing an order, please remember to select a product with an appropriate connector.
The product is also available with a WAŚ 7-pin connector. When placing an order, please let us know about your specific requirements.
The product is also available with a WAŚ 5-pin connector. When placing an order, please let us know about your specific requirements.
The new W250 multifunctional lamp series is characterised by its innovative design and distinctive appearance. The new shape of the position light makes the lamps recognisable and easily visible on the road. The LED position light modules are made of a special material so that no individual luminous points are visible, only the shape of the light with its pleasant neon-effect.
The lamps are available in versions with: 3-, 4- and 5-light functions. The main characteristic of these lamps is the red, 3D outer lens. An unprecedented innovation is to obtain a white reversing light through the completely red lens. The entire surface of the lens is red, so we can easily obtain the position light, the fog light and the stop light, and we have already developed and used the technology to obtain the yellow indicator light through the red lens in our previously released lamps, therefore the major innovation was to obtain the white light. The combination of a red position light and a yellow direction light in one area creates an extraordinary effect. The lamps of the W250 series are available with and without bottom license plate light.
Furthermore, the red outer lens is specially sealed, mounted on 4 screws, allowing the user to replace it themselves. The outer lens is replaceable and fully universal, no matter what light configuration the customer chooses, it is a shared element across all lamps. Each of the modules under the lens is hermetic, even if the outer lens is scratched, no parts inside will be damaged, no humidity or dust will get inside them.
The lamp lens and housing are made of high-quality material, resistant to temperature conditions and UV radiation. Moreover, it has an electromagnetic compatibility approval. It is also noteworthy that there are other variants of the W250 series lamps available with added W44 side marker lamp or without added W44. Additionally, for lamps not equipped with a side position light or a bottom license plate light, we use a thinner housing.
The W250 series with triangular reflective device is intended for trailers and semi-trailers.
In addition, the lamps are easily fitted to the vehicle via two M8x30 screws with a 150mm spacing.
Power consumption
12V
24V
position light
max. 5,9W
max. 6,3W
stop light
max. 6W
indicator light
max. 21W
reversing light
max 8W
fog light
max. 5W
license plate light
0,8W
1,7W
External dimensions of the lamp; width / height / depth: 538mm (302mm) / 131mm / 59-81mm, depending on the chosen version.
Log in to WAŚ lamp In the new series of multifunctional rear lamps W247 - W252 it is possible to custom order lamps with your own light pattern underneath the reflective device
- ask your sales representative for further details
We announce that WAS do not sell in retail! So we invite you to familiarize yourself with our offer and place an order with your nearest distributor of our company.
ONLINE ORDERS ARE ONLY AVAILABLE FOR LOGGED-IN USERS
In order to set up an account, please contact a salesperson!