Multifunctional rear lamps

224 series of lamps

IP 6K9K | 12V-24V | | | |

Type of approval: ECE

W252+W48, W252DD+W48

Multifunctional rear lamps

In some cases, product photos on the website may differ slightly from the originals.

Besides the version with standard cable, the lamp is also available with Schlemmer, TYCO, WAŚ 7-pin or WAŚ 5-pin connectors
amp is easily fitted to the vehicle via two M8x30 screws with a 150mm spacing.
Position light

In lamps from W252 series the position light consists of 4 luminous areas, located on the edges of the lamp and additionally in the form of a logo in the middle of the lamp, hidden underneath the reflective device.
Indicator light

The lamp’s unique feature is the indicator itself, which consists of 2 side modules along with a fragment of the logo, forming a single luminated line.

The logo functions as a red position light and a yellow indicator light, when the indicator is turned on, the red light turns off and triggers the upper line lighting the yellow indicator.
Reversing light - 5-light version

The reversing light takes up 1 or 2 strips depending on the version. The 5-light version is placed on one stripe on the right or left side of the reflective device.

4-light version

The 4-light version takes up 2 modules on the right or on the left side of the lamp, depending on which version is chosen.
Fog light

In lamps from W252 series, the fog light is always 2 light modules located to the right or left of the reflective device, depending on the lamp version.
Stop light - 5-lamp version

In the lamps from W252 series, the stop light takes the shape of 1, 2 or 4 stripes depending on the 3-, 4- or 5-light version and the chosen mounting side L or P. In the 5-light version, the stop lamp is 1 stripe.

4- or 3-light version variant 2

In this case, the stop lamp is placed on 2 stripes on the right or left side of the reflective device, depending on the chosen L or P version.

3-light version variant 1

In this case, the stop light is on 4 stripes and is symmetrically placed on both sides of the reflective device. In addition, it illuminates the 2 upper fields of the position light, which makes the lighting effect even more spectacular.

functions	licence plate lamp	stop light	mounting side	W252
functions	licence plate lamp	stop light	mounting side	cable	Schlemmer	TYCO	WAS5	WAS7
5 T/S/I/F/R	without		left	1993 L	1993 L SCHL	1993 L TYCO	x	1993 L WAS7
	without		right	1993 P	1993 P SCHL	1993 P TYCO	x	1993 P WAS7
	LPD		left	1998 L	1998 L SCHL	1998 L TYCO	x	1998 L WAS7
	LPD		right	1998 P	1998 P SCHL	1998 P TYCO	x	1998 P WAS7
4 T/S/I/F	without		left	1994 L	1994 L SCHL	1994 L TYCO	1994 L WAS5	1994 L WAS7
	without		right	1994 P	1994 P SCHL	1994 P TYCO	1994 P WAS5	1994 P WAS7
	LPD		left	1999 L	1999 L SCHL	1999 L TYCO	1999 L WAS5	1999 L WAS7
	LPD		right	1999 P	1999 P SCHL	1999 P TYCO	1999 P WAS5	1999 P WAS7
4 T/S/I/R	without		left	1995 L	1995 L SCHL	1995 L TYCO	1995 L WAS5	1995 L WAS7
	without		right	1995 P	1995 P SCHL	1995 P TYCO	1995 P WAS5	1995 P WAS7
	LPD		left	2000 L	2000 L SCHL	2000 L TYCO	2000 L WAS5	2000 L WAS7
	LPD		right	2000 P	2000 P SCHL	2000 P TYCO	2000 P WAS5	2000 P WAS7
3 T/S/I	without	variant 1	left	1996 L	1996 L SCHL	1996 L TYCO	1996 L WAS5	1996 L WAS7
		variant 1	right	1996 P	1996 P SCHL	1996 P TYCO	1996 P WAS5	1996 P WAS7
		variant 2	left	1997 L	1997 L SCHL	1997 L TYCO	1997 L WAS5	1997 L WAS7
		variant 2	right	1997 P	1997 P SCHL	1997 P TYCO	1997 P WAS5	1997 P WAS7
	LPD	variant 1	left	2001 L	2001 L SCHL	2001 L TYCO	2001 L WAS5	2001 L WAS7
		variant 1	right	2001 P	2001 P SCHL	2001 P TYCO	2001 P WAS5	2001 P WAS7
		variant 2	left	2002 L	2002 L SCHL	2002 L TYCO	2002 L WAS5	2002 L WAS7
		variant 2	right	2002 P	2002 P SCHL	2002 P TYCO	2002 P WAS5	2002 P WAS7

W252DD - dynamic indicator
All lamps from the W252 series, in all variants, are available in both static and dynamic indicator versions. The part numbers of the dynamic indicator lamps are always marked with the letters DD. W252 dynamic indicator

functions	licence plate lamp	stop light	mounting side	W252DD
functions	licence plate lamp	stop light	mounting side	cable	Schlemmer	TYCO	WAS5	WAS7
5 T/S/I/F/R	without		left	2023 DD L	2023 DD L SCHL	2023 DD L TYCO	x	2023 DD L WAS7
	without		right	2023 DD P	2023 DD P SCHL	2023 DD P TYCO	x	2023 DD P WAS7
	LPD		left	2028 DD L	2028 DD L SCHL	2028 DD L TYCO	x	2028 DD L WAS7
	LPD		right	2028 DD P	2028 DD P SCHL	2028 DD P TYCO	x	2028 DD P WAS7
4 T/S/I/F	without		left	2024 DD L	2024 DD L SCHL	2024 DD L TYCO	2024 DD L WAS5	2024 [DD L WAS7
	without		right	2024 DD P	2024 DD P SCHL	2024 DD P TYCO	2024 DD p WAS5	2024 DD P WAS7
	LPD		left	2029 DD L	2029 DD L SCHL	2029 DD L TYCO	2029 DD L WAS5	2029 DD L WAS7
	LPD		right	2029 DD P	2029 DD P SCHL	2029 DD P TYCO	2029 DD P WAS5	2029 DD P WAS7
4 T/S/I/R	without		left	2025 DD L	2025 DD L SCHL	2025 DD L TYCO	2025 DD L WAS5	2025 DD L WAS7
	without		right	2025 DD P	2025 DD P SCHL	2025 DD P TYCO	2025 DD P WAS5	2025 DD P WAS7
	LPD		left	2030 DD L	2030 DD L SCHL	2030 DD L TYCO	2030 DD L WAS5	2030 DD L WAS7
	LPD		right	2030 DD P	2030 DD P SCHL	2030 DD P TYCO	2030 DD P WAS5	2030 DD P WAS7
3 T/S/I	without	variant 1	left	2026 DD L	2026 DD L SCHL	2026 DD L TYCO	2026 DD L WAS5	2026 DD L WAS7
		variant 1	right	2026 DD P	2026 DD P SCHL	2026 DD P TYCO	2026 DD P WAS5	2026 DD P WAS7
		variant 2	left	2027 DD L	2027 DD L SCHL	2027 DD L TYCO	2027 DD L WAS5	2027 DD L WAS7
		variant 2	right	2027 DD P	2027 DD P SCHL	2027 DD P TYCO	2027 DD P WAS5	2027 DD P WAS7
	LPD	variant 1	left	2031 DD L	2031 DD L SCHL	2031 DD L TYCO	2031 DD L WAS5	2031 DD L WAS7
		variant 1	right	2031 DD P	2031 DD P SCHL	2031 DD P TYCO	2031 DD P WAS5	2031 DD P WAS7
		variant 2	left	2032 DD L	2032 DD L SCHL	2032 DD L TYCO	2032 DD L WAS5	2032 DD L WAS7
		variant 2	right	2032 DD P	2032 DD P SCHL	2032 DD P TYCO	2032 DD P WAS5	2032 DD P WAS7

The product is also available with a TYCO connector. If necessary, please add a note when placing an order.

This product is also available with a Schlemmer connector. All products with Schlemmer connectors have ‘SZ' in their catalogue number. When placing an order, please remember to select a product with an appropriate connector.

The product is also available with a WAŚ 7-pin connector. When placing an order, please let us know about your specific requirements.

The product is also available with a WAŚ 5-pin connector. When placing an order, please let us know about your specific requirements.

The new W252 multifunctional lamp series is characterised by its innovative design and distinctive appearance. The new shape of the position light makes the lamps recognisable and easily visible on the road. The LED position light modules are made of a special material so that no individual luminous points are visible, only the shape of the light with its pleasant neon-effect.

The lamps are available in versions with: 3-, 4- and 5-light functions. The main characteristic of these lamps is the red, 3D outer lens. An unprecedented innovation is to obtain a white reversing light through the completely red lens. The entire surface of the lens is red, so we can easily obtain the position light, the fog light and the stop light, and we have already developed and used the technology to obtain the yellow indicator light through the red lens in our previously released lamps, therefore the major innovation was to obtain the white light. The combination of a red position light and a yellow direction light in one area creates an extraordinary effect. The lamps of the W252 series are available with and without bottom license plate light.
W252 licence plate light

Furthermore, the red outer lens is specially sealed, mounted on 4 screws, allowing the user to replace it themselves. The outer lens is replaceable and fully universal, no matter what light configuration the customer chooses, it is a shared element across all lamps. Each of the modules under the lens is hermetic, even if the outer lens is scratched, no parts inside will be damaged, no humidity or dust will get inside them.

The lamp lens and housing are made of high-quality material, resistant to temperature conditions and UV radiation. Moreover, it has an electromagnetic compatibility approval. It is also noteworthy that there are other variants of the W252 series lamps available with added W44 side marker lamp or without added W44. Additionally, for lamps not equipped with a side position light or a bottom license plate light, we use a thinner housing.
W252 korpusy

The W252 series with triangular reflective device is intended for trailers and semi-trailers.

In addition, the lamps are easily fitted to the vehicle via two M8x30 screws with a 150mm spacing.

Power consumption	12V	24V
position light	max. 5,9W	max. 6,3W
stop light	max. 5W
indicator light	max. 21W
reversing light	max 6W
fog light	max. 5W
license plate light	0,8W	1,7W

External dimensions of the lamp; width / height / depth: 538mm (302mm) / 131mm / 59-81mm, depending on the chosen version.

Log in to WAŚ lamp
In the new series of multifunctional rear lamps W247 - W252 it is possible to custom order lamps with your own light pattern underneath the reflective device
- ask your sales representative for further details

catalogue number click and see the details	type	cable / wires	light source	mounting side	operating voltage	stop	position / front clearance	position / side clearance	position / rear clearance	reversing light	reflective device	fog	rear direction indicator	bottom license plate light	dynamic indicator	pieces in the box
1993 L	W252	195cm	LED	Left	12V-24V											6
1993 P	W252	195cm	LED	Right	12V-24V											6
1994 L	W252	195cm	LED	Left	12V-24V											6
1994 P	W252	195cm	LED	Right	12V-24V											6
1995 L	W252	195cm	LED	Left	12V-24V											6
1995 P	W252	195cm	LED	Right	12V-24V											6
1996 L	W252	195cm	LED	Left	12V-24V											6
1996 P	W252	195cm	LED	Right	12V-24V											6
1997 L	W252	195cm	LED	Left	12V-24V											6
1997 P	W252	195cm	LED	Right	12V-24V											6
1998 L	W252	195cm	LED	Left	12V-24V											6
1998 P	W252	195cm	LED	Right	12V-24V											6
1999 L	W252	195cm	LED	Left	12V-24V											6
1999 P	W252	195cm	LED	Right	12V-24V											6
2000 L	W252	195cm	LED	Left	12V-24V											6
2000 P	W252	195cm	LED	Right	12V-24V											6
2001 L	W252	195cm	LED	Left	12V-24V											6
2001 P	W252	195cm	LED	Right	12V-24V											6
2002 L	W252	195cm	LED	Left	12V-24V											6
2002 P	W252	195cm	LED	Right	12V-24V											6
2023 DD L	W252DD	195cm	LED	Left	12V-24V											6
2023 DD P	W252DD	195cm	LED	Right	12V-24V											6
2024 DD L	W252DD	195cm	LED	Left	12V-24V											6
2024 DD P	W252DD	195cm	LED	Right	12V-24V											6
2025 DD L	W252DD	195cm	LED	Left	12V-24V											6
2025 DD P	W252DD	195cm	LED	Right	12V-24V											6
2026 DD L	W252DD	195cm	LED	Left	12V-24V											6
2026 DD P	W252DD	195cm	LED	Right	12V-24V											6
2027 DD L	W252DD	195cm	LED	Left	12V-24V											6
2027 DD P	W252DD	195cm	LED	Right	12V-24V											6
2028 DD L	W252DD	195cm	LED	Left	12V-24V											6
2028 DD P	W252DD	195cm	LED	Right	12V-24V											6
2029 DD L	W252DD	195cm	LED	Left	12V-24V											6
2029 DD P	W252DD	195cm	LED	Right	12V-24V											6
2030 DD L	W252DD	195cm	LED	Left	12V-24V											6
2030 DD P	W252DD	195cm	LED	Right	12V-24V											6
2031 DD L	W252DD	195cm	LED	Left	12V-24V											6
2031 DD P	W252DD	195cm	LED	Right	12V-24V											6
2032 DD L	W252DD	195cm	LED	Left	12V-24V											6
2032 DD P	W252DD	195cm	LED	Right	12V-24V											6

Download

CALL

W252+W48, W252DD+W48

Position light

Indicator light

Reversing light - 5-light version

4-light version

Fog light

Stop light - 5-lamp version

4- or 3-light version variant 2

3-light version variant 1

Download